The Start Bots Signal category contains descriptions of signals that can start a trading bot. Dimkud Multi is a ready-made external signal for about 20 currency pairs with prepared bot presets.
When creating or editing any bot, there is a Start signal builder block at the bottom of settings. You can select Dimkud Multi 30 or Dimkud Multi 15 there and apply a ready-made settings preset immediately.
What is Dimkud Multi
Dimkud Multi is a combined solution: bot setting presets and start signals were tested together. You get not only a signal, but also recommended grid parameters tuned for each pair.
Based on a three-year backtest, settings and signals were selected for the best profit with the lowest drawdowns. The signals work only for the pairs listed below - for other instruments, use different signals or configure the bot manually.
How backtesting was used
For each pair, a three-year backtest was run with different combinations of grid parameters and start conditions. The goal was to find a balance between profit and drawdown depth.
- Grid presets were tested (standard grids without SL and mini grids with stop-loss).
- Dimkud Multi 30 and 15 signals were checked in parallel across timeframes.
- Only combinations with stable historical results were included in the presets.
Dimkud Multi 30 vs 15
Two options are available in Start signal builder:
- Signal ID
Dimkud Multi 30:dimkud_multi_30m
Dimkud Multi 15:dimkud_multi_15m - Signal frequency
Dimkud Multi 30: Higher - signals arrive more often
Dimkud Multi 15: Lower - fewer entries - Backtest profit
Dimkud Multi 30: Higher
Dimkud Multi 15: Slightly lower - Risk and drawdowns
Dimkud Multi 30: Higher, deeper drawdowns possible
Dimkud Multi 15: Lower, fewer long and deep drawdowns - When to prefer
Dimkud Multi 30: Rising or sideways market
Dimkud Multi 15: Falling or bearish market
Supported trading pairs
Dimkud Multi signals are designed only for the pairs listed below. Using them on other instruments is not recommended.
Standard grid without SL
Signals: 30 / 15 min
Direction: Long
BTCUSDTSOLUSDTETHUSDTDOGEUSDTXMRUSDTXRPUSDTXLMUSDTAAVEUSDTNEOUSDTONDOUSDTLINKUSDTNEARUSDTLTCUSDTBNBUSDTADAUSDTTRXUSDTBCHUSDTHBARUSDTHYPEUSDTPAXGUSDT
Quick start: preset + signal
The easiest path is to pick a ready bot preset (ETH, BTC, SOL and others) and one of the Dimkud Multi signals in Start signal builder:
- Create a bot or open an existing one for editing.
- Select a preset for the pair you need (for example, BTCUSDT Long).
- In Start signal builder, choose Dimkud Multi 30 or Dimkud Multi 15.
- Save the bot - settings and signal are already aligned.
Switching 30 ↔ 15 when the market changes
When the market enters a downtrend or higher volatility, consider switching from Dimkud Multi 30 to Dimkud Multi 15 - a more conservative option with smaller drawdowns.
On a rising or calm market, Dimkud Multi 30 may provide more entries and higher backtested profit. Switch in Start signal builder without changing the bot preset.
Customization
Dimkud Multi presets and signals are a starting point, not a hard limit. You can:
- Change any bot parameters after selecting a preset.
- Replace Dimkud Multi with another signal from Start signal builder.
- Combine manual settings with any available start signal.
Practical tips and risk note
- Use Dimkud Multi only on supported pairs from the list.
- Prefer Dimkud Multi 15 in bearish market conditions.
- SHORT presets with stop-loss are available only for BTC, ETH and SOL with the 30 min signal.
- Backtest results do not guarantee future profit - crypto trading involves risk of capital loss.
Important
Dimkud Multi helps you start faster with tested settings. Risk control, deposit size, and the decision to run a bot remain the user’s responsibility.